Showing posts with label Altered Art. Show all posts
Showing posts with label Altered Art. Show all posts

Thursday, August 9, 2012

Digital Scrapbook Pages - Salt Lake City, UT 2012

July 2012 was an adventurous time for my family, in that my father-in-law took 
us on a bit of a Wild West Tour through Utah and Wyoming.  
We saw some wonderful sites and a great time was had by all.

After unpacking, laundry and getting back into the swing of things; I've been in the process 
of sorting and scrapbooking our adventure.  It's taken a bit of work but I finally have 
enough pages put together that I'm ready to start posting the adventure.  
I'll be adding more to this page as I get them done.

Here are some notable sites from Salt Lake City 2012


Temple Square

Digital Scrapbook page using photos taken at Temple Square in 2012 -  by EKDuncan


 It matters not what religion you are; if in Salt Lake City a trip through Temple Square is a must.
The gardens there are really beautiful and it's so clean and pristine 
in appearance you'd think you were in Disney.
(The background pages are photos I took at the garden area around the Assembly Hall)

"Temple Square" is a 10 acre complex located in the center of Salt Lake City, UT and it is
owned and the center of the LDS church. The square houses several buildings
including the assembly hall and most notably the Tabernacle itself.

The Salt Lake Temple was a 40 year building project and had its dedication in 1893.
The temple of Solomon in Jerusalem is believed by some to have been an influence in it's construction. The Temple stands 210 feet at it's highest center pinnacle.

Vintage images from Temple Square can be seen at 
The Utah State digital collection - HERE

*****

Utah State Capital

Digital Scrapbook page of The Utah State Capitol in Salt Lake City, UT - by EKDuncan
It was workout to walk up to the Capitol from Temple Square.  My hubby (seen pictured above in the red shirt) and I took a side street that had to be at a 45 degree angle uphill for several blocks.  Once we got to the Capital we still had a ton of stairs to climb to get tot he building proper - but it was worth it.  The architecture and then the view from the terraces were worth the workout and a bruised toe I acquired along the way.

The Capitol was designed by local architect Richard K. A. Kletting, who's
 architectural plans included reinforced concrete, elevators and the use of natural light.
It has been home to Utah's state government since its opening in 1916.
(Previously the "City-County" building played that role among others).

*****

The McCune Mansion

Digital Scrapbook page using photos taken of McCune Mansion in 2012 -  by EKDuncan
On our "trek" up the hill to find the Capitol, we stumbled upon this amazing house on a hill.  
I just had to stop and take some photos because it looked so much like a Haunted House you would see in an old movie.  To my surprise I later discovered it was really haunted; which might explain the "odd" sensation I felt while standing outside it.  We would have loved to see the interior; however you have to book tours well in advance. Now I know if I'm ever in the area again to book a tour!

Railroad tycoon Alfred W. McCune built the 21,000 square foot, three story, twenty-five room Mansion as his family home. Construction began in 1898 and was completed in 1901 at a cost of 1,000,000 million dollars. The exterior was built of native Utah sandstone and the roof, covered with tiles made in the Netherlands. The interior was lavish even for the time period; with details shipped in from all over the world such as: Nubian and Irish marble, bird's-eye maple, South American mahogany, 400-year-old English oak, French tapestries, Russian leather and German mirrors. Carved wood, gold leaf hand gilding, the exquisite murals as well as painted ceilings only added to it's splendor.


Vintage photos can be seen HERE
You can read more about the history of the house HERE and HERE
Tours are available through the Utah Heritage Foundation

*****

Orpheum Theater - Promised Valley Playhouse

Digital Scrapbook page using photos taken of the old Orpheum Theater Facade in 2012 -  by EKDuncan
My husband and I were walking several blocks down from the Capital on State Street, when I looked up to see the side of a huge carved face jutting out from the side of the building.  I stopped and stared for a second that started taking photos.  We made our way across the street so I could continue admiring and capturing all the lovely elements on this c1900 building for the next 20 minutes or so.

Luckily my hubby was being entertained by what armed guards performing their duties a few doors down at the Federal Reserve building. - grins

The exterior of this building is grand in every way; but sadly the theater itself was not salvaged.  
It suffered the fate of so may old theaters in that it was not deemed feasible to invest funds into restoring the old gem. The stage and auditorium are just a memory for those who remember her and what can be seen in old black and white photos from her glory days.  

The Theater had many name changes through it's history: The Orpheum 
(since it was part of the Orpheum theater chain when it was first built) 
then -  The Casino Theater, The Wilkes Theater, The Roxey Theater, 
The Salt Lake Theater, and The Lyric Theater.  
It closed as a movie theater in 1971. 
The "Church" bought the theater in 1972, renaming it the Promised Valley Playhouse.
It was closed in 1996 due to structural problems and the theater's interior was demolished in 2003.

Luckily the facade and lobby were preserved and converted for office and retail space;
 rather than it becoming a 400 car parking tower as was originally intended. 


Old photos are under a variety of it's previously known names  
The Orpheum aka Wilkes Theater - HERE
The Orpheum aka Casino Theater - HERE
The Orpheum aka Lyric Theater - HERE

*****

Salt Lake "City-County" Building

Digital Scrapbook page using photos taken at the old Courthouse aka City-County Building in SLC by EKDuncan


 This c1890 building is HUGE but then again it was built to replace the older 1860's buildings
that housed the Salt Lake City Council and the Salt Lake County Courthouse.

Construction took three years and $900,000 to complete.
Their were multiple delays in building that eventually caused the project $620,000
over the original bid price of.  The originally planed for stained glass windows were
discarded to keep the project from incurring any more additional costs.

The style is considered "Richardsonian Romanesque" and was constructed by Free Masons of
gray Utah Kyune sandstone.  It has five floors, over one hundred rooms and onyx lines the hall of each lavishly decorated floor. The building served as Utah's Capitol from 1896 until 1915. It also housed Salt Lake's first public library and contained courtrooms for decades.

Although now used exclusively by Salt Lake City government.
The third floor houses the mayor's office in the south wing
and the city council chambers in the north.


I love how different a building can look just based on the time period in which a photo was taken.
When I tried to take my pictures from across the street there were too many tall trees blocking my shots as well as traffic, lights and electrical wires.
Additional photos of this building can be seen - HERE
 
*****


Cathedral of the Madeleine

Digital scrapbook page of The Cathedral of the Madeleine using photos taken in Salt Lake City by EKDuncan
This Catholic cathedral in Salt Lake City, combines a predominately Romanesque exterior with a Gothic interior and is interesting mix of styles and design elements. 
It was eye catching even from a distance and to honor my Catholic roots,
I did not resist the long walk to this cathedral on the hill.

I spent a lot of time taking photos of all the great exterior elements and was expecting to see
 an interior similar to one I attended as a child or other cathedrals I visited in Spain;
however I was not expecting what I found upon entering these hallowed doors.
It's as if Gothic-Revival collided with a version of Byzantine-Fiestaware.

At first I was overwhelmed with all the patterns and colors and carvings and ...
Luckily it was the middle of the week and we had the interior to ourselves for a while. I even laid down on the floor so I could get a photo of the painted ceiling; which I used to create the background paper you see behind the photos on my scrapbook page.

The Cathedral of the Madeleine, who's patron saint is Mary Magdalene, was a nine year building project from 1900-1909.  The interior was later "beautified" in 1917 to include murals and a colorful paint scheme. According to the history listed on the church's website the inspiration for the interior was to reflect Spanish Gothic of the Late Middle Ages.  The interior paint style is referenced as "polychrome", which is "The practice of decorating architectural elements, sculpture, etc., in a variety of colors."  This was commonly done on buildings in the ancient world as well as more recently with Victorian and Art Deco Architecture, such as with the "Painted Lady" houses seen throughout California.  It truly makes this Cathedral unique from others I have been in.

Vintage photos of the Cathedral can be seen - HERE

*****


B'nai Israel Temple

Digital Scrapbook Page of the B'nail Israel Temple built in the 1890's and now home to a Design Group



 As American settlers continued to move west they brought their customs and beliefs with them. This building from the early 1890's is one of the few remaining Jewish buildings created by early Utah settlers.  Originally - B'nai Israel Temple, it's now the offices of the Henriksen/Butler Design Group.

I'm always intrigued when religious buildings are converted into alternate environments and was thrilled at the opportunity to see the peaceful and innovative workspace this design group created.

 The Temple itself was designed by the German nephew of the then affluent merchant and businessman Frederick Auerbach.  Philip Meyer came to Salt Lake City at his uncles expense and designed this structure as a scaled down version of Berlin’s Great Synagogue. After completion in 1891 Meyer returned to Germany but sadly both Meyer and the Berlin Synagogue did not survive the ravages of WWII.

The building was sold in 1970 when a larger place of worship was constructed to serve the Jewish community and in 1978 it was placed on the National Register of Historic Places. Since then it has housed a variety of businesses including restaurants and offices.


Vintage photos of the Temple can be found - HERE
at the Utah State History Digital Collection

 *****


Immanuel Baptist Church

Scrapbook page of a vacated church with a new purpose

Another case of an old church that has a new lease in life.  Originally this classical revival church served as the Immanuel Baptist Church throughout most of the 1900's and was placed on the National Register of Historic Places in 1978. When it was placed on the National Register it was listed as being a sports facility at that time so my guess is the building has been a variety of venues since the 1970's. 

I'm a big fan of "re-purposing" old items and giving them a new life, so I especially like to see how churches and places of worship are given a new lease on life.  In this case this grand old lady is now  Art and Antique Gallery at 401 E.  200 South Salt Lake City.  Sadly my hubby and I did not have time to go inside and wander through all the treasures; however I was captivated by the antique statues and the Victorian hearse that were on display outside - Very eye catching!

More photos of the building can be found in their archives HERE
Utah State History Digital Collection

Vintage Postcard of the church
I even found this vintage postcard of the church online.


*****


First Methodist Episcopal Church

Scrapbook page of the great architecture found on the First Methodist Episcopal Church in Salt Lake City
I loved the fun architectural elements found on this 1905 building of worship.  

This is the oldest (still operational) Methodist church in the state of Utah and stands as an  
excellent example of Protestant church activity and architecture in the area.
Built in 1905 at 203 S. 200 East in Salt Lake City, stands this grand lady of whimsy. Designed by Frederick Albert Hale, a well known UT architect of his day.  He designed a variety of churches that were built in Denver; however this was his only church commission in the state of Utah. 


Vintage photo of First Methodist Episcopal
I liked this vintage photo from the Utah State Historical Digital Collection so much 
that I worked it into my digital scrapbook layout.  
This and other images of the church can be found HERE

*****


I'm still working on more scrapbook pages and will update this post 
with the new ones as  I complete them.

Till then...


 Many of the elements used to create my digital scrapbook pages 
came from Scrapgirls.com just in case you were wondering ;)

Sunday, August 5, 2012

Steampunk - Vintage Watch Pendant Project

I'm a big fan of "Steampunk" and have been meaning to start a new project for sometime; however it's one of those projects that kept getting put on the back shelf. Yesterday I finally made a new jewelry piece and have to say I really like the outcome and thought it was worth sharing.
The last time I created Steampunk pendants was back in 2010, so I've been long overdue.

While on a family vacation last month, we chanced upon a craft fair and a lady was selling necklaces made from old broken pocket watches.  Some of them were quite interesting and had a bit of a Steampunk look to them but with a price tag of $150- $180 each for these items; I decided to make one of my own for a fraction of the cost.  

I was able to create the one pictured here for about $30.00 in supplies and then my time and labor.
I'd say this do-it-yourself project saved me a large chunk of change and I was able to personalize my pendant the way I wanted it. Plus I get the bragging right to say "I Made It".


EKDuncan Steampunk Vintage Watch Pendant/Necklace
My pendant/necklace is a fun fashion statement as is; however it will probably be altered again down the line. I'm still hunting the perfect "dangle" that will replace the red crystal drop and I also want a different chain for the necklace part.  I'll post an updated picture when the makeover happens, till then I'll be happy to wear it "as is".


*********
 
Here Is How I Made It
For all of you who like to see how an item gets created, 
I have a few photos showing the process for this little beauty.


Step 1 - Acquire the Necessary Parts and Pieces to Begin Assembling your Project.

Vintage Rolled Gold Ladies Pocket Watch - purchased off eBay
The final outcome will only be as attractive as the items used to create it. 
I wanted a small but attractive case to add the final "oomph" to my piece and found it.

I spent a few days on eBay "watching" for interesting cases in my price range and picked this one up for $15.00 with shipping included. This Octagonal case is a "rolled" rose gold with very little base metal showing through. It was in non working order: had no crystal, crown or hands and the dial was showing it's age but for me it was a great find and I got if for a fair price.
I believe this case is either late Victorian or from the Edwardian time period.

(I already had a stockpile of vintage watch parts and pieces to work with so the only new item 
I needed was the pretty case to pull it all together. Etsy and eBay are good places to start your hunt if you need little parts and pieces as well as  a nice case.)




Step 2 - Figure Out How to Get the Silly Thing Open

This watch was a bit tricky to get open - Here it is with the faceplate off
The last thing I wanted to do was damage my pretty case so I spent about an hour looking it 
over and lucked up on getting the front off when I could not find any way of getting the back off.  
Sometimes you're lucky and there will be a "lip" to help you pry a case off but there weren't any easy areas of entry on this old gem. 

I lucked up while carefully twisting the loop at the top and the front of the watch surprisingly slipped off. I breathed a big sigh of relief, since I thought I was home free; but the movement would not come out the front - which meant I had to get the back off too. (ugh)



Step 3 - Continue to Figure Out How to Get the Silly Thing Open

Success - the watch is open and the movement is out
 With the Crown and stem missing there was not easy access to get the back open so, I used a bit of pressure with my thumbs to push back on the dial while my other fingers held onto the side of the case in hopes of getting the back to pop open and I had success. Now I was able to remove the movement through the back of the fully opened watch.

I considered using the original movement for my piece; however it would not fit into the original case in the reversed position. Not even with the two securing screws removed (you can see those at approximately the 12 & 6 o'clock portion of the movement from this view) It's those two screws that kept the movement from being able to be pulled out the front in step 2.

I will hold on to this movement for another project later on down the line.



Step 4 - Build a Steampunk Movement for my Empty Case

I popped in another movement I created back in 2010 that needed a case.
 I pulled out my stockpile of "Steampunk" watch parts and partially assembled movements till I found one that was nearly complete and fit fairly well in my case.  This one just needed a few extra wheels and cogs on the side to make it work so I went with this one. 


vintage watch movements and parts in my "Steampunk" stockpile
I probably invested close to $100.00 in vintage watch parts and supplies back in 2010; so  
I still have quite a few options to choose from even after completing several other projects.

It can be a bit tedious to build a funky "Steampunk" style movement but the right tools can make all the difference. These needle nose tweezers and the G-S Hypo cement with super narrow tip allow me to accomplish great things with small pieces and parts.



Step 5 -Close it All up Nice and Tight.

My new "created" movement is now in the vintage watch case.
I closed up my new Steampunked movement in the vintage case and 
added an old watch crown from my supplies to the top.



Step 6 - Add the Finishing Touches and Enjoy!

My Final Creation
I added in a small red crystal to he bottom hanger an interesting chain so I could wear it right away.
Fun and funky was my final result; however it still isn't quite right. I'm hunting for a different chain and a more Steampunk/Victorian dangle to replace the crystal drop.  I can take my time in locating those two items since it's quite wearable the way it currently is and the hunt is half the fun.



My previous Steampunk jewelry projects have been:

Steampunked Flash drive by EKDuncan 2010
I altered a flash drive into a Steampunked pendant with a purpose.
You can see the project - HERE


Steampunk Pendant by EKDuncan 2010
This was the first Steampunk jewelry creation I made from 
an old piece of sterling jewelry and some watch parts.
You can see the post for it - HERE


And now I have my latest wearable creation to add to the list.

My Latest Steampunk Jewelry Creation - 2012
I hope this has inspired someone else to give it a try and see what you can come up with.
It's so much fun to take vintage items that are broken and unwanted and "re-purpose" them into something new and fun. It truly shows that one persons trash really is another's treasure.


Here is the watchpiece creation in png form for those
who would like to use it in digital art creations.

digital png format of my watchpiece creation
This and other images can be found on my deviantART account at
http://eveyd.deviantart.com/

(please note my "Terms of Use" at the top right of my blog
or on  my deviantART account before using)
I like to share but my Muse gets frustrated when others try and sell those images.




Till Next Time...



Tuesday, June 7, 2011

Asian Domino Art Choker - Sharpie Polished Stone Effect

I'm honored to be a guest designer for Scrolls Work Rubber Stamps during the month of June and today, using their stamps I'm going to show one of my all time favorite craft projects... Domino Art!

For those who are not yet aware - Scrolls Works is having an amazing close out sale and their remaining inventory is 50% off the original price.  Many images have sold out; however there are still some great stamps available for purchase - so don't miss out and grab them while you can.

I was searching through my collection of Scrolls Work stamps to see which images were still available for sale and decided to continue with my Asian theme for this "Domino Art" project.


Asian Domino Art Choker using Scrolls Work  rubber stamp and Sharpie pens
 One of my favorite stamping projects is Domino Art.
I find it very relaxing to make these miniature works of stamp art and by creating a 
polished stone background with Sharpie markers it is also a quick and easy process.

I designed the whimsical Asian Domino Art Choker with a large domino for the center bead 
and then strung some fancy crystal and glass beads along with some 
silver dragonflies and bell shapes on a bit of memory wire.  

This fun piece of wearable stamp art was quick and easy; 
it took me less than 2 hours from start to finish. 

 

supplies for creating the polished stone background
For this project I drilled my domino with a rotary tool to create the center bead in the necklace; 
however I've also glued on bails or beads to my dominos in the past to create pendants.
So, don't let that stop you from giving it a try.

The Polished Stone background on my domino was created using
Sharpie pens, 91% rubbing alcohol I put in a small spray bottle and some felt pads on a 
dauber tool (mine is by Tim Holtz) and I cut the felt pads from felt sheets I buy at the craft store.


I quickly clean my domino with alcohol to prime the surface; 
then I scribble with the Sharpie pens so I have good color coverage across the top.   


 Next I lightly spritz a clean felt pad with alcohol and then 
daub and twist the pad over the top of the domino.

I do this till I get a background I like.  
If I accidentally remove too much color I add more Sharpie pen and repeat the process.  
If I don't like the background I can quickly clean it all away with alcohol and start fresh.


Once I have a background I like I stamp my image with Black StazOn ink.

The image I used for this project is a great Asian word stamp "Kanji - Imagine"
from Scrolls Work Stamps and is still available, whole supplies last.

I find the Polished Stone effect on dominos makes a great background
for all kinds of word stamps.


 Most of the time I edge my domino art with a black chisel tip Sharpie pen.
Then I seal the top and sides with matte Mod Podge to give the domino 
a bit of wearable durability.


I wear a lot of my Domino art pieces on a simple cord but occasionally 
I add a bunch of beads to make a statement piece like this one.



Here are two more examples of Scrolls Work stamps in my Domino Art.
These I've edged with a gold leafing pen, just for a change of pace from my usual black border.

It's fun to play with various Sharpie color combinations and stamp images.
These two dominos have not been drilled so I will later glue a bail on them 
and use them as pendants on a black cord.

The left domino has a fun Asian script and Ginkgo leaves.
(both of these stamps are currently available at Scrolls Works in the Asian Antics section)
The Asian Script "Letters of Artist" is in the of Words and Text
The Ginkgo Leaf is in the Plants section under Asian Antics.

The right domino has an Asian poem and the word Wish.
(both of these stamps are also currently available ate Scrolls Works stamps while supplies last)
The Asian Poem is under Words and Text in the Asian Antics section
The word "Wish" is from "The Word Is" - Collage Words section.
It is from the Mini Collage Words Set and these tiny words are super for domino art.
(don't miss getting these if you do domino art other mini art projects)

I have no idea what the Asian words of the poem say but with a word like 
Wish or Love or Hope from the mini collage word set;
I can make it represent whatever I want it to be.

This is my Scrolls Work stamp spin on "Domino Art" and now
I have 3 great Asian art pieces to were this summer.

I hope you give it a try too.



Monday, March 7, 2011

Rainbow Flame Backgrounds using Faskolor Paint and Photoshop

I thought I'd mix my art a bit with this next project and digitally altered a painted background into some great new backgrounds.  I've stocked all the items over at my EveyD deviantART account where you can download the larger images if you like them.


Rainbow Flames #1
This was my first alteration of the original painted background.
I took a section of the painted piece created a duplicate, flipped it horizontally to 
created a mirror image and then merge the two to create a new digital background.


This was the original painted background I started with.
Click HERE to see the blog post showing how this was created,
with Faskolor paint and glossy black cardstock.

*****

I'm one of those people that like to know how something was done and 
wanted to show the steps I took to create my project.
(for those who are like me and ask - "how did she do that?"

Please note - there are many ways to do things in Photoshop.
This is just the way I got to my end result.

I located a section I wanted to use and cropped it out.


 I made the section a bit narrower digitally by selecting
Edit - Free Transform
then pushing the long side in till I had the look I wanted.


 I created a duplicate layer to make the left side of the project.
This new layer was "flipped" to make a mirror image of the original 
via Edit - Transform - Flip Horizontal


Then the two halves were moved together and merged.

To mere the two layers into a new image:
I chose to hold the shift key and highlight my two layers,
then I clicked the right mouse button and choose Merge Layers.

Like most thing in Photoshop there are several ways to do one function.
Here are two other examples of how you can Merge
You can also highlight the layers and hit Ctrl +E  if you like short cut commands
or you can use the tool bar and select Layer - Merge Layers.
 choices - choices - so many choices.

 
 This was the final result after the merge.
The mirror effect created a really cool background image 
that to me look like flower blossoms, leaves, birds and flames.


By repeating this same process of taking an original image, duplicating it, then flipping
it horizontally or vertically was able to create a large selection of backgrounds.
I took the new merged image from above and did just that to create this more complex image.

There are 6 layers of my New Image in this wild design.
And here is how I did this one.


I created the center of the piece by adding a duplicate layer
of my image and this time flipping it vertically.
The two were then merged to form the center panel of the intricate pattern.


3 large panels or 6 half panels were used to make the full background.

By cropping, duplicating, flipping, merging, pulling and squashing 
the assortment of creations is endless.

I started playing around with other sections of the original painted Faskolor 
piece and came up with over 20 variations of patterns before I called it quits.
I just could not help but see what the next variation would look like.

These backgrounds were created to share so I posted them to my  
EveyD deviantART account.
Use the above link, then select gallery
for access to downloading the larger 300 dpi files.


*****

Here are what the other variations look like.
Enjoy!


 EKD Rainbow Flames #2


 EKD Rainbow Flames #3


 EKD Rainbow Flames #4


EKD Rainbow Flames #5



EKD Rainbow Flames #6


EKD Rainbow Flames #7

 
EKD Rainbow Flames #8

 
EKD Rainbow Flames #9

 
 EKD Rainbow Flames #10


EKD Rainbow Flames #11
 

 EKD Rainbow Flames #12


 EKD Rainbow Flames #13


 EKD Rainbow Flames #14


 EKD Rainbow Flames #15


 EKD Rainbow Flames #16
(this is the one shown in the Tutorial)


 EKD Rainbow Flames #17


 EKD Rainbow Flames #18


EKD Rainbow Flames #19
 

 Rainbow Flames #20


 EKD Rainbow Flames #21


And for a change of pace here are a  few using the original Faskolor 
background with some Animal Print transparency overlays.

EKD Rainbow Tiger Print


 EKD Rainbow Leopard #1


 EKD Rainbow Leopard #2


I hope you give this a try and create some fun pieces of your own.
Thanks for dropping in to see what road my muse has taken me down this time.



 Grins and Giggles,
  Evelyn