Showing posts with label Antique. Show all posts
Showing posts with label Antique. Show all posts

Thursday, August 9, 2012

Digital Scrapbook Pages - Salt Lake City, UT 2012

July 2012 was an adventurous time for my family, in that my father-in-law took 
us on a bit of a Wild West Tour through Utah and Wyoming.  
We saw some wonderful sites and a great time was had by all.

After unpacking, laundry and getting back into the swing of things; I've been in the process 
of sorting and scrapbooking our adventure.  It's taken a bit of work but I finally have 
enough pages put together that I'm ready to start posting the adventure.  
I'll be adding more to this page as I get them done.

Here are some notable sites from Salt Lake City 2012


Temple Square

Digital Scrapbook page using photos taken at Temple Square in 2012 -  by EKDuncan


 It matters not what religion you are; if in Salt Lake City a trip through Temple Square is a must.
The gardens there are really beautiful and it's so clean and pristine 
in appearance you'd think you were in Disney.
(The background pages are photos I took at the garden area around the Assembly Hall)

"Temple Square" is a 10 acre complex located in the center of Salt Lake City, UT and it is
owned and the center of the LDS church. The square houses several buildings
including the assembly hall and most notably the Tabernacle itself.

The Salt Lake Temple was a 40 year building project and had its dedication in 1893.
The temple of Solomon in Jerusalem is believed by some to have been an influence in it's construction. The Temple stands 210 feet at it's highest center pinnacle.

Vintage images from Temple Square can be seen at 
The Utah State digital collection - HERE

*****

Utah State Capital

Digital Scrapbook page of The Utah State Capitol in Salt Lake City, UT - by EKDuncan
It was workout to walk up to the Capitol from Temple Square.  My hubby (seen pictured above in the red shirt) and I took a side street that had to be at a 45 degree angle uphill for several blocks.  Once we got to the Capital we still had a ton of stairs to climb to get tot he building proper - but it was worth it.  The architecture and then the view from the terraces were worth the workout and a bruised toe I acquired along the way.

The Capitol was designed by local architect Richard K. A. Kletting, who's
 architectural plans included reinforced concrete, elevators and the use of natural light.
It has been home to Utah's state government since its opening in 1916.
(Previously the "City-County" building played that role among others).

*****

The McCune Mansion

Digital Scrapbook page using photos taken of McCune Mansion in 2012 -  by EKDuncan
On our "trek" up the hill to find the Capitol, we stumbled upon this amazing house on a hill.  
I just had to stop and take some photos because it looked so much like a Haunted House you would see in an old movie.  To my surprise I later discovered it was really haunted; which might explain the "odd" sensation I felt while standing outside it.  We would have loved to see the interior; however you have to book tours well in advance. Now I know if I'm ever in the area again to book a tour!

Railroad tycoon Alfred W. McCune built the 21,000 square foot, three story, twenty-five room Mansion as his family home. Construction began in 1898 and was completed in 1901 at a cost of 1,000,000 million dollars. The exterior was built of native Utah sandstone and the roof, covered with tiles made in the Netherlands. The interior was lavish even for the time period; with details shipped in from all over the world such as: Nubian and Irish marble, bird's-eye maple, South American mahogany, 400-year-old English oak, French tapestries, Russian leather and German mirrors. Carved wood, gold leaf hand gilding, the exquisite murals as well as painted ceilings only added to it's splendor.


Vintage photos can be seen HERE
You can read more about the history of the house HERE and HERE
Tours are available through the Utah Heritage Foundation

*****

Orpheum Theater - Promised Valley Playhouse

Digital Scrapbook page using photos taken of the old Orpheum Theater Facade in 2012 -  by EKDuncan
My husband and I were walking several blocks down from the Capital on State Street, when I looked up to see the side of a huge carved face jutting out from the side of the building.  I stopped and stared for a second that started taking photos.  We made our way across the street so I could continue admiring and capturing all the lovely elements on this c1900 building for the next 20 minutes or so.

Luckily my hubby was being entertained by what armed guards performing their duties a few doors down at the Federal Reserve building. - grins

The exterior of this building is grand in every way; but sadly the theater itself was not salvaged.  
It suffered the fate of so may old theaters in that it was not deemed feasible to invest funds into restoring the old gem. The stage and auditorium are just a memory for those who remember her and what can be seen in old black and white photos from her glory days.  

The Theater had many name changes through it's history: The Orpheum 
(since it was part of the Orpheum theater chain when it was first built) 
then -  The Casino Theater, The Wilkes Theater, The Roxey Theater, 
The Salt Lake Theater, and The Lyric Theater.  
It closed as a movie theater in 1971. 
The "Church" bought the theater in 1972, renaming it the Promised Valley Playhouse.
It was closed in 1996 due to structural problems and the theater's interior was demolished in 2003.

Luckily the facade and lobby were preserved and converted for office and retail space;
 rather than it becoming a 400 car parking tower as was originally intended. 


Old photos are under a variety of it's previously known names  
The Orpheum aka Wilkes Theater - HERE
The Orpheum aka Casino Theater - HERE
The Orpheum aka Lyric Theater - HERE

*****

Salt Lake "City-County" Building

Digital Scrapbook page using photos taken at the old Courthouse aka City-County Building in SLC by EKDuncan


 This c1890 building is HUGE but then again it was built to replace the older 1860's buildings
that housed the Salt Lake City Council and the Salt Lake County Courthouse.

Construction took three years and $900,000 to complete.
Their were multiple delays in building that eventually caused the project $620,000
over the original bid price of.  The originally planed for stained glass windows were
discarded to keep the project from incurring any more additional costs.

The style is considered "Richardsonian Romanesque" and was constructed by Free Masons of
gray Utah Kyune sandstone.  It has five floors, over one hundred rooms and onyx lines the hall of each lavishly decorated floor. The building served as Utah's Capitol from 1896 until 1915. It also housed Salt Lake's first public library and contained courtrooms for decades.

Although now used exclusively by Salt Lake City government.
The third floor houses the mayor's office in the south wing
and the city council chambers in the north.


I love how different a building can look just based on the time period in which a photo was taken.
When I tried to take my pictures from across the street there were too many tall trees blocking my shots as well as traffic, lights and electrical wires.
Additional photos of this building can be seen - HERE
 
*****


Cathedral of the Madeleine

Digital scrapbook page of The Cathedral of the Madeleine using photos taken in Salt Lake City by EKDuncan
This Catholic cathedral in Salt Lake City, combines a predominately Romanesque exterior with a Gothic interior and is interesting mix of styles and design elements. 
It was eye catching even from a distance and to honor my Catholic roots,
I did not resist the long walk to this cathedral on the hill.

I spent a lot of time taking photos of all the great exterior elements and was expecting to see
 an interior similar to one I attended as a child or other cathedrals I visited in Spain;
however I was not expecting what I found upon entering these hallowed doors.
It's as if Gothic-Revival collided with a version of Byzantine-Fiestaware.

At first I was overwhelmed with all the patterns and colors and carvings and ...
Luckily it was the middle of the week and we had the interior to ourselves for a while. I even laid down on the floor so I could get a photo of the painted ceiling; which I used to create the background paper you see behind the photos on my scrapbook page.

The Cathedral of the Madeleine, who's patron saint is Mary Magdalene, was a nine year building project from 1900-1909.  The interior was later "beautified" in 1917 to include murals and a colorful paint scheme. According to the history listed on the church's website the inspiration for the interior was to reflect Spanish Gothic of the Late Middle Ages.  The interior paint style is referenced as "polychrome", which is "The practice of decorating architectural elements, sculpture, etc., in a variety of colors."  This was commonly done on buildings in the ancient world as well as more recently with Victorian and Art Deco Architecture, such as with the "Painted Lady" houses seen throughout California.  It truly makes this Cathedral unique from others I have been in.

Vintage photos of the Cathedral can be seen - HERE

*****


B'nai Israel Temple

Digital Scrapbook Page of the B'nail Israel Temple built in the 1890's and now home to a Design Group



 As American settlers continued to move west they brought their customs and beliefs with them. This building from the early 1890's is one of the few remaining Jewish buildings created by early Utah settlers.  Originally - B'nai Israel Temple, it's now the offices of the Henriksen/Butler Design Group.

I'm always intrigued when religious buildings are converted into alternate environments and was thrilled at the opportunity to see the peaceful and innovative workspace this design group created.

 The Temple itself was designed by the German nephew of the then affluent merchant and businessman Frederick Auerbach.  Philip Meyer came to Salt Lake City at his uncles expense and designed this structure as a scaled down version of Berlin’s Great Synagogue. After completion in 1891 Meyer returned to Germany but sadly both Meyer and the Berlin Synagogue did not survive the ravages of WWII.

The building was sold in 1970 when a larger place of worship was constructed to serve the Jewish community and in 1978 it was placed on the National Register of Historic Places. Since then it has housed a variety of businesses including restaurants and offices.


Vintage photos of the Temple can be found - HERE
at the Utah State History Digital Collection

 *****


Immanuel Baptist Church

Scrapbook page of a vacated church with a new purpose

Another case of an old church that has a new lease in life.  Originally this classical revival church served as the Immanuel Baptist Church throughout most of the 1900's and was placed on the National Register of Historic Places in 1978. When it was placed on the National Register it was listed as being a sports facility at that time so my guess is the building has been a variety of venues since the 1970's. 

I'm a big fan of "re-purposing" old items and giving them a new life, so I especially like to see how churches and places of worship are given a new lease on life.  In this case this grand old lady is now  Art and Antique Gallery at 401 E.  200 South Salt Lake City.  Sadly my hubby and I did not have time to go inside and wander through all the treasures; however I was captivated by the antique statues and the Victorian hearse that were on display outside - Very eye catching!

More photos of the building can be found in their archives HERE
Utah State History Digital Collection

Vintage Postcard of the church
I even found this vintage postcard of the church online.


*****


First Methodist Episcopal Church

Scrapbook page of the great architecture found on the First Methodist Episcopal Church in Salt Lake City
I loved the fun architectural elements found on this 1905 building of worship.  

This is the oldest (still operational) Methodist church in the state of Utah and stands as an  
excellent example of Protestant church activity and architecture in the area.
Built in 1905 at 203 S. 200 East in Salt Lake City, stands this grand lady of whimsy. Designed by Frederick Albert Hale, a well known UT architect of his day.  He designed a variety of churches that were built in Denver; however this was his only church commission in the state of Utah. 


Vintage photo of First Methodist Episcopal
I liked this vintage photo from the Utah State Historical Digital Collection so much 
that I worked it into my digital scrapbook layout.  
This and other images of the church can be found HERE

*****


I'm still working on more scrapbook pages and will update this post 
with the new ones as  I complete them.

Till then...


 Many of the elements used to create my digital scrapbook pages 
came from Scrapgirls.com just in case you were wondering ;)

Sunday, August 5, 2012

Steampunk - Vintage Watch Pendant Project

I'm a big fan of "Steampunk" and have been meaning to start a new project for sometime; however it's one of those projects that kept getting put on the back shelf. Yesterday I finally made a new jewelry piece and have to say I really like the outcome and thought it was worth sharing.
The last time I created Steampunk pendants was back in 2010, so I've been long overdue.

While on a family vacation last month, we chanced upon a craft fair and a lady was selling necklaces made from old broken pocket watches.  Some of them were quite interesting and had a bit of a Steampunk look to them but with a price tag of $150- $180 each for these items; I decided to make one of my own for a fraction of the cost.  

I was able to create the one pictured here for about $30.00 in supplies and then my time and labor.
I'd say this do-it-yourself project saved me a large chunk of change and I was able to personalize my pendant the way I wanted it. Plus I get the bragging right to say "I Made It".


EKDuncan Steampunk Vintage Watch Pendant/Necklace
My pendant/necklace is a fun fashion statement as is; however it will probably be altered again down the line. I'm still hunting the perfect "dangle" that will replace the red crystal drop and I also want a different chain for the necklace part.  I'll post an updated picture when the makeover happens, till then I'll be happy to wear it "as is".


*********
 
Here Is How I Made It
For all of you who like to see how an item gets created, 
I have a few photos showing the process for this little beauty.


Step 1 - Acquire the Necessary Parts and Pieces to Begin Assembling your Project.

Vintage Rolled Gold Ladies Pocket Watch - purchased off eBay
The final outcome will only be as attractive as the items used to create it. 
I wanted a small but attractive case to add the final "oomph" to my piece and found it.

I spent a few days on eBay "watching" for interesting cases in my price range and picked this one up for $15.00 with shipping included. This Octagonal case is a "rolled" rose gold with very little base metal showing through. It was in non working order: had no crystal, crown or hands and the dial was showing it's age but for me it was a great find and I got if for a fair price.
I believe this case is either late Victorian or from the Edwardian time period.

(I already had a stockpile of vintage watch parts and pieces to work with so the only new item 
I needed was the pretty case to pull it all together. Etsy and eBay are good places to start your hunt if you need little parts and pieces as well as  a nice case.)




Step 2 - Figure Out How to Get the Silly Thing Open

This watch was a bit tricky to get open - Here it is with the faceplate off
The last thing I wanted to do was damage my pretty case so I spent about an hour looking it 
over and lucked up on getting the front off when I could not find any way of getting the back off.  
Sometimes you're lucky and there will be a "lip" to help you pry a case off but there weren't any easy areas of entry on this old gem. 

I lucked up while carefully twisting the loop at the top and the front of the watch surprisingly slipped off. I breathed a big sigh of relief, since I thought I was home free; but the movement would not come out the front - which meant I had to get the back off too. (ugh)



Step 3 - Continue to Figure Out How to Get the Silly Thing Open

Success - the watch is open and the movement is out
 With the Crown and stem missing there was not easy access to get the back open so, I used a bit of pressure with my thumbs to push back on the dial while my other fingers held onto the side of the case in hopes of getting the back to pop open and I had success. Now I was able to remove the movement through the back of the fully opened watch.

I considered using the original movement for my piece; however it would not fit into the original case in the reversed position. Not even with the two securing screws removed (you can see those at approximately the 12 & 6 o'clock portion of the movement from this view) It's those two screws that kept the movement from being able to be pulled out the front in step 2.

I will hold on to this movement for another project later on down the line.



Step 4 - Build a Steampunk Movement for my Empty Case

I popped in another movement I created back in 2010 that needed a case.
 I pulled out my stockpile of "Steampunk" watch parts and partially assembled movements till I found one that was nearly complete and fit fairly well in my case.  This one just needed a few extra wheels and cogs on the side to make it work so I went with this one. 


vintage watch movements and parts in my "Steampunk" stockpile
I probably invested close to $100.00 in vintage watch parts and supplies back in 2010; so  
I still have quite a few options to choose from even after completing several other projects.

It can be a bit tedious to build a funky "Steampunk" style movement but the right tools can make all the difference. These needle nose tweezers and the G-S Hypo cement with super narrow tip allow me to accomplish great things with small pieces and parts.



Step 5 -Close it All up Nice and Tight.

My new "created" movement is now in the vintage watch case.
I closed up my new Steampunked movement in the vintage case and 
added an old watch crown from my supplies to the top.



Step 6 - Add the Finishing Touches and Enjoy!

My Final Creation
I added in a small red crystal to he bottom hanger an interesting chain so I could wear it right away.
Fun and funky was my final result; however it still isn't quite right. I'm hunting for a different chain and a more Steampunk/Victorian dangle to replace the crystal drop.  I can take my time in locating those two items since it's quite wearable the way it currently is and the hunt is half the fun.



My previous Steampunk jewelry projects have been:

Steampunked Flash drive by EKDuncan 2010
I altered a flash drive into a Steampunked pendant with a purpose.
You can see the project - HERE


Steampunk Pendant by EKDuncan 2010
This was the first Steampunk jewelry creation I made from 
an old piece of sterling jewelry and some watch parts.
You can see the post for it - HERE


And now I have my latest wearable creation to add to the list.

My Latest Steampunk Jewelry Creation - 2012
I hope this has inspired someone else to give it a try and see what you can come up with.
It's so much fun to take vintage items that are broken and unwanted and "re-purpose" them into something new and fun. It truly shows that one persons trash really is another's treasure.


Here is the watchpiece creation in png form for those
who would like to use it in digital art creations.

digital png format of my watchpiece creation
This and other images can be found on my deviantART account at
http://eveyd.deviantart.com/

(please note my "Terms of Use" at the top right of my blog
or on  my deviantART account before using)
I like to share but my Muse gets frustrated when others try and sell those images.




Till Next Time...



Saturday, June 4, 2011

Antique Paper Doll - Adelina Patti

My quest for Antique L&B Ballerina and Prima Donna Paper Dolls continues and I hope to one day have a full collection of these amazing little works of art.

I've been fortunate enough to have purchased some of these 100+ year old beauties over the past few years and in some situations the dolls I've purchased have had mismatched parts.  My great fortune has been that by evaluating the odds and ends I've been able to reconstruct several complete dolls as they were originally designed and sold in the late 1800's.

One of the great thing about these dolls is that they still look wonderful with parts that were not original for that specific doll head; but I'm thrilled to present the doll as she was originally intended.

Adelina Patti
She was a highly acclaimed opera dive in the late 19th century.
Adelina Patti - Green L&B Ballerina Paper Doll
From my research, I've found that the Adelina Patti head was to have been
paired with Green ballerina slippers and  arms with gold bracelets.  
Luckily I had all the parts in my current collection to complete 
this doll as she was originally intended.  

Naturally other L&B doll parts of the same size could be paired up 
with this head; like pink ballerina slippers or pink Prima Donna body parts.  
I originally purchased her with yellow Prima Donna parts but now 
I have her the way she was intended as a green ballerina.


Vintage photos of Adelina Patti




Adelina Patti - As I was able to purchase her
I purchased this Adelina Patti doll as seen above with these yellow
"Prima Donna" doll parts and though they will work well as an alternate dressing style
for this doll, the green ballerina parts do suite her best.


Alternate doll parts by L&B for their paper doll line
 This lovely set of black doll limbs were also available when these dolls were
originally made.  I love the fact that the legs are in the ballerina style yet the arms
are from their prima donna line.  A great mix of both dolls in elegant black.


I now have 2 out of 3 ballerinas from L&B set #2844
The first one is Lillian Russell - I posted about her yesterday.
The Middle one is Adelina Patti


I still hope to add the blue ballerina to my collection.

This is what the complete Blue Ballerina would look like

Till Next time...


Friday, June 3, 2011

Antique Paper Doll - Lillian Russell

One of the treasures I collect are L&B antique pressed paper dolls that were sold both under the name of the German maker L&B (Littauer & Boysen) or also by the US distributor Dennison.

These dolls are amazing in person, since they are large, heavy duty embossed lithographs.
The actual pieces for this Lillian Russell doll is around 14 inches tall assembled, when you add a torso to her.  The head portion of this doll is 4 inches high, her legs are 7 inches high and her torso 5 3/4 inches high.

One of the dolls currently in my collection is of the late 19th century Actress Lillian Russell.
Since these paper dolls are over 100 years old and getting harder and harder to get; when I first purchased my doll she did not have the correct color of ballet slippered legs.  Luckily, I've since been able to acquire the correct color of legs and now have all the correct parts and pieces.

I finally have all the correct parts for this paper doll
 It took me a while to get all the correct parts to complete this 
Lillian Russell doll but here she is - at last!


The beautiful and talented Lillian Russell
Vintage photos of the Actress.
I love Victorian images.  
It's so much fun to see the clothes and hairstyles.
 

Lillian Russell doll as I originally purchased her
 When I originally purchased this doll, from a nice lady in Australia;
she had the green ballet slippers of another doll - Adelina Patti
(see the next post)


These are the 3 Actress Ballerina dolls by L&B.

3 Ballerina Actress Heads by L&B

3 matching pairs of arms and legs - Blue, Pink and Green
I don't own the two sets above so I can't provide a better scan of the parts;
but I love how the image shows they were once all attached from the
manufacturer when they left L&B in Germany and wanted to show them.
( I have each of these dolls parts separately, just not the complete connected sheets 2844 and 2849)



Another look for the Lillian Russell doll

Back in October I did a project using this for a Halloween Witchy look
where I paired her head up with another set of vintage L&B legs and arms in Black.

This is the original scan of doll parts I used for my Halloween project
I started with this original scan of parts and then made some alterations in Photoshop.


This is what she looked like after I altered her in Photoshop
 I wanted a Witchy look for my project so I changed her bodice
to orange and then I cleaned up the black on her legs and gloves.


An original vintage torso for the L&B dolls
 This torso is original to the age of the L&B
paper doll and is 5 3/4 inches tall.
With the bodice in place you can dress up the doll any way you
like it or you can just cover the torso in a pretty pattern and let her be a corset doll.



The great thing about these dolls is that I can scan them in, clean them up, change colors 
when needed and use them as many times as I want in art project while the originals 
are safely protected in a special binder waiting for more lovelies to join them.  
If I'm lucky I'll find another doll or two before the year is out.  
Wish me luck!


Tuesday, December 28, 2010

Hand Carved Thread Spool Santa - Vintage Find

While I was on Christmas vacation, I was wandering in some quaint shops in Seneca, SC and came upon some interesting vintage thread spools that had been carved with Santa faces.  I thought they were cute at the time but seeing as they had been turned into key chains, I didn't buy one.  Only after I got back home did their images keep going back through my mind and now I wish I had purchased one and turned it into a tree ornament.

Oh, well that is the way it goes sometimes...so I got on the web today to see what I could find on hand carved Santa thread spools and was surprised to see so many options out there for me to choose from.

 I just loved this eBay find - hand carved by Gayle Roush


 This is the top view of the above Santa - showing the vintage thread label.


This fun thread spool carved Santa is by Bayou Creations


 This Carved Santa on Thread Spool is by Touch of Color Knowtes


 And then I found a great page showing how these are carved.

 Step by step as a Santa Face is carved.
By Barbara of Touch of Color Knowtes.
Click HERE for link to see step by step instruction on carving a thread spool.

The Finished Santa by Barbara of Touch of Color Knowtes.

I just might have to give this process a try in 2011.


 Grins, Giggles and Happy New Year!
 Evelyn

Wednesday, December 8, 2010

Victorian Ladies - Articulated Paper Doll Ornaments for Christmas

I'm still on my antique paper doll kick and had a few laying around and ready to decorate,
so I turned them into Christmas ornaments.  

 6 Articulated Paper Doll Ornaments
color copies of "Prima Donna" paper dolls by L&B

The paper dolls are scaled down versions of antique c 1900 paper dolls 
made by L&B and sold by Dennison.

These dolls with bloomers and gloved hands were of well known actresses of their day 
and were called "Prima Donna" dolls when sold in the Dennison Art and Decoration 
catalog in the late 1800's and early 1900's

I started my collection of original L&B antique paper dolls after finding this
scanned set on the Internet several years ago.

These Dolls were posted on the web courtesy of Dresden Star Ornaments
Click HERE - for their pdf link to these dolls.

I started by printing the dolls on heavy white cardstock using my laser printer and making patterned paper bodices. Each doll was then cut out, assembled and trimmed for the tree.


There are so many ways you can dress these dolls up from using fabric and trims 
to adding other printed materials to finish them off.  It just makes a fun project to see what 
your imagination can come up with.


These are the 6 dolls I created using the 
3 doll patterns from above.

 Blue Butterfly Wing Skirt Doll
I printed several images of a blue butterfly and cut up the wings to create her skirt.


 Pink Crystal Flower Skirt Doll
A store bought beaded floral spray makes a great sparkly skirt.


 Green Leaf Skirt Doll
Two pretty greenery leaves were used to create this simple skirt.


 Blue Fan Skirt Doll
I printed two different sizes of an antique paper fan for this skirt.
 (This is probably my favorite out of the six dolls)


 Green Beaded Skirt Doll
A store bought beaded floral spray makes a great sparkly skirt
and it coordinates with the pink doll with similar skirt.
 
 Red Tulle Skirt Doll
A small piece of tulle and some thread made a fun skirt

I just wanted to create some simple dolls but the possibilities are endless. 
Glitter, rhinestones, crowns and fancy hats could also be added for those who want fancier dolls.


Here are some scans of antique paper dolls I have in my collection 
that can also be used to make articulated ornaments.


Alexandria of Denmark 
by L&B

 Actress Della Fox 
with Black Ballerina legs and arms by L&B


 Actress Lillian Russell 
by L&B


 Unknown Actress 
ballerina paper doll parts by L&B


Unknown Actress 
jointed paper doll parts by L&B


 Actress Adeline Pattie 
Prima Donna jointed paper doll parts by L&B


Torso Pattern 
size it as needed to use with doll parts


Grins and Giggles, 
Evelyn